Cheap Talk 6 for VI
High contrast switches! The switches on our Cheap Talk 6 for VI are two different colors and outlined in black to make it easier to select your pre recorded messages.
• 6 levels
• 225 seconds total record time
• 6 seconds per message
• Built-in icon holder
DOWNLOAD your FREE copy of our Skills Development Chart for the Visually Impaired
Size: 20"L x 4¾"W x 2½"H. Requires 4 AA Batteries. Weight: 2 lbs.
Our new and unique Cheap Talk 6 for the visually impaired user is easy to
use. Each switch is outlined in black to make it easier to select your pre
recorded message. It has a built in icon holder to hold your icons.
• 6 levels
• 225 total record time
• 6.25 seconds per message
• Easy single message recording
• Volume control
• Excellent sound quality
Size: 20"L x 2 ½ "H x 4 ¾ "W. Requires Capability Switch and 4 AA
1. Carefully turn over unit to reveal battery compartment. Remove the
battery covers with a small Phillips Head screwdriver. Install four AA
size batteries into the holders observing polarity. Use alkaline batteries
only (e.g. Duracell or Energizer brand). Do not use rechargeable
batteries or any other type of batteries because they supply lower voltage
and the unit will not perform properly. Never mix old and new batteries
together or different brands or types together.
2. Turn the unit on by rotating the ON/Off/Volume knob clockwise and
adjust to an audible level. Next turn the LEVEL SELECTOR knob to
Level 1. To turn the unit off rotate the VOLUME CONTROL knob
counterclockwise until you hear an audible “click”.
3. To record, depress and hold the red RECORD button located on the
back of the unit. While still holding the RECORD button, depress one
of the six message switches on the front of the unit and speak into the
microphone located on the back of the unit.
4. Release both the message switch and the recording button when the
recording is finished. Play back your message by pressing and releasing
the same message switch used to record. Each of the remaining switches
can be recorded in the same manner.
5. The unit will retain recorded information indefinitely, even if the
batteries are removed. Previously stored information will only be erased
when a new recording is performed.
6. Move the LEVEL SELECTOR knob to Level 2 and repeat Step 3.
Continue programming additional levels in the same manor, if needed.
7. It is recommended after use that the unit be turned off, to extend overall
battery life. This can be done by turning the VOLUME CONTROL
knob counterclockwise, until you hear an audible "click".
8. Above the message switches there is an icon holding strip for placing
your icons, you can put individual icons or pictures or a strip containing
six icons or photos.
Problem: The unit fails to operate, or operates incorrectly.
Action #1: Disconnect the power by turning OFF the unit for 20 seconds to
reset the unit. If the unit still does not work correctly after the power is
reconnected, check and replace the batteries observing proper polarity.
Action #2: If the unit still does not work, remove the colored flexible frames
and make sure there is no dirt or obstacles between the black rectangular
plates and the housing of the unit.
Care of Unit:
The Communicator for VI can be wiped clean with any household multipurpose
cleaner and disinfectant. We recommend Simple Green, which is a
non toxic biodegradable all-purpose cleaner.
Do not submerge the unit, as it will damage the electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
|A/S안내||아이소리몰 고객센터 1544-2311||세금타입||과세||브랜드/규격|